User's Manual

Chapter13 NEOBIT 1014VA ADSL Router User’s Guide
Adding a PPP Interface Definition
If you intend to use more than one type of service from your ISP,
the device may be configured with multiple PPP interfaces, each
with unique logon and other properties. Follow this procedure to
define properties for a PPP interface:
1. From the PPP Configuration Page, click
.
The PPP Interface – Add page displays, as shown in Figure 48.
Figure 48. PPP Interface – Add Page
2. Select a PPP interface name from the drop-down list, and
then enter or select data for each field.
Note
You can create multiple PPP interfaces only if you are using the
PPoA protocol; only one PPP interface can be define if you are
using PPoE. Check with your ISP which version of the protocol
they require.
The fields are defined in the tables on page 98 and 100.
3. Click
.
A page displays to confirm your changes.
4. Click
to return to the PPP page and view the new
interface in the table.