User's Manual

NEOBIT 1014VA ADSL Router User’s Guide Chapter3
Part 3 — Configuring the NEOBIT 1014VA
In Part 3, you log into the program on the NEOBIT 1014VA and
configure basic settings for your Internet connection. Your ISP
should provide you with the necessary information to complete this
step.
Logging in to the NEOBIT 1014VA Quick Configuration Page
The NEOBIT 1014VA provides a preinstalled software program
called Configuration Manager which enables you to configure the
operation of the device via your Web browser. The settings that you
are most likely to need to change before using the device are
grouped onto a single Quick Configuration page.
Follow these instructions configure the device settings:
1. At any PC connected to the NEOBIT 1014VA via Ethernet or
USB, open your Web browser, and type the following URL in
the address/location box:
192.168.1.1/setup
When you press <Return>, the page shown in Figure 11 should
display (see Appendix C, “Troubleshooting,” if you receive an
error message or the page does not display).
Figure 11. Quick Configuration Page in Configuration Manager