User's Manual

33
4 Getting Started with the Configuration Manager
The NEOBIT 1014VA includes a preinstalled program called the
Configuration Manager, which provides an interface to the software
installed on the device. It enables you to configure the device
settings to meet the needs of your network. You access it through
your web browser from any PC connected to the NEOBIT 1014VA
via
the LAN or USB ports.
This chapter describes how to use the Configuration Manager.
Accessing the Configuration Manager
The Configuration Manager program is preinstalled into memory on
the NEOBIT 1014VA. To access the program, you need the
following:
 A PC or laptop connected to the LAN port on the device as
described in the Quick Start chapter.
 A web browser installed on the PC. The program is
designed to work best with Microsoft Internet Explorer®
version 5.0, Netscape Navigator® version 4.7, or later
versions.
You can access the program from any computer connected to the
NEOBIT 1014VA via the LAN or USB ports.
1. From a LAN computer, open your web browser, type the
following URL in the web address (or location) box, and
press <Enter>:
http://192.168.1.1
Or, from the USB computer, type:
http://192.168.1.2
These are the predefined IP addresses for the LAN and USB
ports on the NEOBIT 1014VA.
A login screen displays, as shown in Figure 12.