User Manual

13
Q4: Unable to access the Internet.
A4:
⑴ Check first if the LAN LED on the front panel of 201ER is ON. When the LAN LED is not illuminated,
check if Ethernet cable is securely connected from the S-707 LAN connectors located on the rear
panel to the PC’s LAN card.
⑵ When the LINK LED is not solid green within 2 minutes, check your telephone line connection
between wall jack providing the ADSL signal to the Line port on the modem.
⑶ If both the LAN and Sync lights are ON, verify the settings of your PC. The 201ER will automatically
provide you an IP, Gateway, and DNS addresses. To check this setting on your Windows based PC,
Click Start - Settings - Network - TCP/IP - Properties in sequence and verify that the IP address is set
to "obtain an IP and DNS address Automatically" and the Gateway field should be blank.
Q5: The PWR LED is not ON.
A5:
⑴ Verify the power switch on the back of the 201ER is in the ON position.
⑵ Verify the connection is secure in the back of the unit and from the power source.
⑶ Verify that you are using the power supply provided with the 201ER.
⑷ If the above items have been verified, please contact your service provider.