User Manual

36
Supplier:
RIP advertisements are transmitted in intervals depending on your setting for Interval.
Select the True to enable or False to disable this function from the pull-down menu.
Gateway:
When the value of Gateway is True, RIP advertisements include a default gateway.
Multicast:
When the value of Multicast is True, received broadcast RIP messages are ignored, and received
multicast RIP messages are accepted.
Interval:
Enter the timing of how many seconds you want to transmit RIP messages when you set as
True. The default interval is 30 seconds.
Handshake Protocol:
In the Handshake Protocol bar, you can use the pull-down menu to select the handshake
protocol supplied by your ISP. The factory default is set to Autosense-G.dmt first.
Note: The chart below is for your reference and contains the most common setup procedures.
Please keep in mind that your ISP’s configuration may not be the same as below.