User Manual

39
Note: If you need to host a Web Server, you must change the HTTP management port in
the MISC configuration page to something other than port 80.
b. Enter an ID number to specify the virtual server. Enter the Public Port number which corresponds to
the applications port (Ex. Telnet uses port 23). DQ Technology has predefined common applications
for ease of configuration.
c. Enter the Private Port number which is the port number you forward to the specified IP address. In
most cases, this will be same as the Public Port.
d. Type port identifies the protocol (TCP or UDP) of the virtual server application.
e. The Host IP Address field identifies the IP address of the server where the ports will be forwarded.
f. Click Add This Setting to save your setting, and you will see your settings show on the list. You can
click Delete This Setting to delete your setting.