User Manual

40
▶ Bridge Filtering Page
a. Click the Bridge Filtering option in the Configuration menu and you will see the following screen.
b. You can control the flow of packets across the router using this function. Bridge filtering lets you deny
or allow packets to cross the network based on the MAC address and position of the address within
the packet.
This enables you to restrict or forward messages with a specified address passing through the LAN to
WAN. Choose Yes in Enable Bridge Filtering to enable this function.
c. The 201ER is capable of filtering Ethernet packets based on their source/destination address and
protocol type. To restrict certain packets, complete the ID Source MAC, Destination MAC and TYPE
field. Enable the Block button and click Add.
d. If you want to disable bridge filtering mode for one of the local MAC addresses, enable the Forward
button for the address.
▶ Misc Configuration Page