User Manual

a. Click the Misc Configuration option in the Configuration menu and you will see the following screen.

b. If you want to enable DMZ, make sure the NAT or NAPT function is enabled (please refer to the

section describing NAT in this manual). Choose Enabled for DMZ and fill in the host IP in the DMZ

HOST IP to enable the DMZ function.

c. If you want to enable DHCP Relay, you must enter the IP address of the DHCP server in the DHCP

Target IP.

d. The IGMP Proxy capability allows users anywhere on a downstream network to join an upstream

sourced multicast group. Enable the IGMP Proxy if you want to use this function.

e. When finished, click Submit. You can click Reset to bring back the last setting; this function can only

be used

before you click Submit.

☞ Definitions