User Manual

VisionNet 202ER ADSL Ethernet Router User’s Guid
37
Rebooting the device using Configuration Manager
To reboot the device, display the Commit and Reboot page, select
the appropriate reboot mode from the drop-down menu, and then
click
.
You can select from the following three options when rebooting:
Option Description
Reboot from Last
Configuration
Reboots the device using the current settings in
permanent memory, including any changes you
just committed.
Reboot from Backup
Configuration
Reboots the device using settings stored in
backup memory. These are the settings that were
in effect before you committed new settings in the
current session.
Reboot from Default
Configuration
Reboots the device to default settings provided by
your ISP or the manufacturer. Choosing this
option erases any custom settings.
WARNING
Do not reboot the device using the Reset button on the back panel
of the VisionNet 202ER to activate new changes. This button
resets the device settings to the manufacturer’s default values.
Any custom settings will be lost.