User Manual

VisionNet 202ER ADSL Ethernet Router User’s Guide
50
5. Click .
A confirmation page displays briefly to indicate that the pool has
been added successfully. After a few seconds, the DHCP
Server Pool – Add page displays with the newly added pool.
6. Follow the instructions in “Setting the DHCP Mode” on
page 53 to set the DHCP mode to DHCP Server.
Viewing, modifying, and deleting address pools, and
excluding IP addresses from a pool
To view, modify, or delete an existing address pool, display the
DHCP Server Configuration page, and click the icons in the
corresponding row in the address pool table.
 To delete an IP address pool, click
, then submit and
commit your changes.
 To view details on an IP address pool, click
. A page
displays with all the same information you entered when
adding the pool.
 To modify the domain name associated with an IP address
pool, or to exclude addresses from the pool, click
. The
DHCP Server Pool – Modify page displays.
The DHCP Server Pool – Modify page is shown in Figure
17.
Figure 17. DHCP Server Pool – Modify Page
Excluded addresses are those that you have designated
for fixed use with specific devices, or for some other reason
do not want to make available to your network.
To exclude an address from distribution, type it in the fields
provided and click
. Click after entering your
changes. Be sure to use the Commit feature to save your
changes to permanent memory, as described on page 36.
Viewing current DHCP address assignments
When the VisionNet 202ER functions as a DHCP server for your
LAN, it keeps a record of any addresses it has leased to your