User Manual

VisionNet 202ER ADSL Ethernet Router User’s Guid
53
A page displays to confirm your changes, and then the program
returns to the DHCP Relay Configuration page.
6. Follow the instructions in “Setting the DHCP Mode” on
page 53 to set the DHCP mode to DHCP Relay.
Setting the DHCP Mode
You should set the DHCP mode only after you have configured
DHCP relay or DHCP server settings. See “Configuring DHCP
Server” on page 47 or “Configuring DHCP Relay” on page 52 for
additional instructions.
Follow these instructions to set the DHCP mode:
1. Click DHCP Mode in the LAN tab
2. Choose DHCP Server, DHCP Relay.
If you choose none, your LAN computers must be configured
with static IP addresses.
3. Click
.
4. Click Save and Reboot in the Save Setting tab.
5. Click
to save your changes to permanent memory.