User Manual

VisionNet 202ER ADSL Ethernet Router User’s Guid
75
a.
the WAN tab, and then click DNS in the task bar. The DNS
Configuration page displays.
b. Type the IP address of the DNS server in an empty row and click
.
You can enter only two addresses.
c.
Click the Enable radio button, and then click
.
3. Click
Save and Reboot in the Save Setting tab.
4. Click
to save your changes to permanent memory.
Note
DNS addresses that are assigned to LAN PCs prior to enabling
DNS relay will remain in effect until the PC is rebooted. DNS relay
will only take effect when a PC's DNS address is the LAN IP
address.
Similarly, if after enabling DNS relay, you specify an DNS
address (other than the LAN IP address) in a DHCP pool or
statically on a PC, then that address will be used instead of the
DNS relay address.