User Manual

VisionNet 202ER ADSL Ethernet Router User’s Guide

4 Getting Started with the Configuration

Manager

The VisionNet 202ER includes preinstalled program called the

Configuration Manager, which provides an interface to the software

installed on the device. It enables you to configure the device

settings to meet the needs of your network. You access it through

your web browser from any PC connected to the VisionNet 202ER

via

the LAN port.

This chapter describes how to use the Configuration Manager.

Note

The VisionNet 202ER may already be configured to provide Internet

connectivity for your network. If it works properly with the

preconfigured settings, then you may not need to use the

Configuration Manager. Contact your ISP to determine which

settings you may need to change, if any.

Accessing the Configuration Manager

The Configuration Manager program is preinstalled into memory on

the VisionNet 202ER. To access the program, you need the

following:

 A PC or laptop connected to the LAN port on the device as

described in the Quick Start chapter.

 An web browser installed on the PC. The program is

designed to work best with Microsoft Internet Explorer®

version 5.0, Netscape Navigator® version 6.2, or later

versions.

You can access the program from any computer connected to the

VisionNet 202ER.

1. From a LAN computer, open your web browser, type the

following URL in the web address (or location) box, and

press <Enter>:

http://10.0.0.2

These are the predefined IP addresses for the LAN ports on the

VisionNet 202ER.

A login screen displays, as shown in Figure 7.