User's Manual

A modem is set as a Multi Mode in default.
You can change the ADSL Mode using bsp glite(G.Lite), bsp ansi(T1.413) and bsp
multi(Multi sensing) instead of bsp gdmt.
You can confirm the Mode with the following commands.
Wel+8010S> bsp mode
ADSL Modem Mode is: gdmt (State : SHOWTIME_L0)
Using Webconsole, you can change the ADSL Mode by clicking Config/ADSL Mode and
selecting the specific ADSL Mode.
On ADSL Mode screen,
“Modem State” shows the ADSL Sync. Status
and “Modem Mode” displays the
current setting mode of the modem.
If you want to change the mode to
Specific Mode, select a Mode you
want and click on “SAVE” button.
During the alteration of a
Configuration value in System, you can see the following screen.
If the configuration is changed successfully, you can see the following message.