Specifications

17
PROGRAMMING INSTRUCTIONS (continued)
IMPORTANT: This oven is pre-programmed from the factory and does not require
programming adjustments under normal circumstances. Any programming
changes must be performed by qualified persons only.
ACTION DISPLAY WILL READ
IMPORTANT: DO NOT CHANGE FACTOR VALUES OR TIME VALUES FOR EXISTING MENU ITMES
13) Press PROG button. Display will read FACTOR 1 VALUE 00000
FACTOR 1 TIME 00000
14) Press PROG button repeatedly to cycle through
factor values and factor times (1 - 5).
Display will read <COOLING TIMER> COOLING TIMER NO
15) Press button #2 or #8 to enable or disable
cooling timer. COOLING TIMER YES
16) Press PROG button COOLING TIME
17) Set desired cooling time (0 - 60 minutes)
Press button #2 to increase time
or button #8 to decrease time 10:00
18) Press PROG button. Beep will sound to
indicate new information is saved. UPDATING MENU ITEM
(This is the end of this programming
cycle. If no other menu items are to be
programmed, go on to # 19. If other menu
items are to be programmed, press PROG
to return to # 6.) SELECT DAYPART # 1
19) Press START button EDIT MENU ITEM NO
20) Press START button OVEN READY
Programming the controller is now complete.
NOTE: ENTER PROGRAMMING and VIEW PROGRAMMING are disabled during cook cycle and while
cooling timer is activated.
M903 2M-307323 Owners Manual M4200/M4200EU