Specifications

PROGRAMMING INSTRUCTIONS (continued)

IMPORTANT: This oven is pre-programmed from the factory and does not require

programming adjustments under normal circumstances. Any programming

changes must be performed by qualified persons only.

ENABLING SCRATCH BISCUIT BUTTON (#6)

ACTION DISPLAY WILL READ

1. Enter programming mode, press and

hold PROG button for 5 seconds CAL TEMP NO

2. Press PROG button until EDIT MENU is

reached EDIT MENU ITEM NO

3. Press #2 or #8 button for YES EDIT MENU ITEM YES

4. Press PROG button PASSWORD 0000

See page 22 for password and recommended oven settings

5. Press PROG button to select daypart. SELECT DAYPART # 1

NOTE: Only daypart #1 is activated

6. Press PROG button SEL>

7. Press # 6 button to select SCRATCH BISCUITS SCRATCH BISCUITS

8. Press PROG button to enable any name change SCRATCH BISCUITS

9. Press PROG button ENABLE NO

10. Press #2 button to enable SCRATCH BISCUIT

Button ENABLE YES

11. Press PROG button CANCEL A/M MANUAL

(Should always be Manual)

12. Continue pressing PROG button until beep

sounds, indicating new information was saved UPDATING MENU ITEM

13. Press START button OVEN READY

Enabling Scratch Biscuit button (#6) is now complete.

IMPORTANT: DO NOT CHANGE FACTOR VALUES OR FACTOR TIMES FOR EXISTING MENU

ITEMS

NOTE: Cannot go into edit or view program mode when cooling timer is activated or when in

a bake cycle.

M903 2M-307323 Owners Manual M4200/M4200EU