Specifications

CLEANING INSTRUCTIONS
23
PREPARATION Allow oven to cool to 150ºF (65°C) or less
FREQUENCY Daily
TOOLS Clean Towels
DAILY CLEANING
1. With power switch ON, open oven door. Press UTILITY key.
Display will read FAST COOL MODE. Press START key. Display
will read COOL DOWN and fan will start. When oven has cooled,
press power switch OFF.
2. Wipe down interior of oven and inside surface of door with a clean
towel dampened with water.
3. Dry by wiping with a clean dry towel.
4. Wipe control panel with a clean dry towel to remove any build-up of
grease or food particles.
PROCEDURE IS COMPLETE
CAUTION:
SHOCK HAZARD
Disconnect appliance from
electric power
before cleaning.
CAUTION:
BURN HAZARD
Allow appliance to cool to
150ºF or less before cleaning.
Do not attempt to clean the
oven until it has cooled to
150ºF (65°C) or less. It can
burn you. Hand protection is
required.
IMPORTANT:
DO NOT use steel wool
or abrasive cleansers for
cleaning this appliance.
Always wipe or rub in the
direction of the polish lines
or grain of the metal.
IMPORTANT:
DO NOT spill or pour water
into control panel or wiring.
NOTE:
Damage to internal
components from water
damage is not covered by
warranty.
M903 2M-307323 Owners Manual M4200/M4200EU