Specifications

M903 2M-307323 Owners Manual M4200/M4200EU
The M4200 Convection Oven manufactured by WELLS for sale
to McDonald's, Inc. is warranted against defects in materials
and workmanship for a period of two years from the date of
installation (
as indicated by the installation punch-tag on the
equipment
), and is for the benefit of the original purchaser:
All other equipment manufactured by WELLS for sale to
McDonald's, Inc. is warranted against defects in materials
and workmanship for a period of one year from the date of
installation (
as indicated by the installation punch-tag on the
equipment
), and is for the benefit of the original purchaser:
THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN
IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, WHICH ARE HEREBY EXCLUDED.
WELLS SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY
CAUSE WHATSOEVER.
This warranty is void if it is determined that upon inspection
by an Authorized Service Agency that the equipment has
been modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God.
It also does not apply if the serial nameplate has been
removed or unauthorized service personnel perform service.
The prices charged by Wells for its products are based upon
the limitations in this warranty. Seller’s obligation under this
warranty is limited to the repair of defects without charge by
a Wells Authorized Service Agency or one of its sub-
agencies. This service will be provided on customer’s prem-
ises for non-portable models. Portable models (a device
with a cord and plug) must be taken or shipped to the
closest Authorized Service Agency, transportation charges
prepaid, for services.
In addition to restrictions contained in this warranty, specific
limitations are shown below (Additional Warranty
Exclusions). Authorized Service Agencies are located in
principal cities.
This warranty is valid in the United States & Canada and
void elsewhere. Please consult your classified telephone
directory or your food service equipment dealer; or, for infor-
mation and other details concerning warranty, write to:
Wells
10 Sunnen Dr., St. Louis MO 63143 USA
phone [phone] or fax [phone]
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells cannot assume liability for damage or loss incurred in
transit. We will, however, at your request, supply you with
the necessary documents to support your claim.
SHIPPING DAMAGE CLAIM PROCEDURE
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to fifty (50) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
2