Specifications

UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
Appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS
1 ea FILTER CAGE 1 ea TRANSFER WAND
1 ea FILTER CLIP 1 ea POLISHING WAND
1 ea FILTER ADAPTER 1 ea RESERVOIR COVER
1 pkg FILTER BAGS 1 ea POWER CORD
ASSEMBLY and SETUP
Assemble filter:
Slide filter bag over filter cage. Be sure hole in bag is in position
over adapter fitting.
Fold end of bag and secure with filter clip.
Attach filter adapter to filter cage.
Attach filter assembly to pump at filter union.
Install reservoir cover in place on oil reservoir.
Plug power cord into power receptacle on rear of pump motor housing.
Wind power cord around holding bracket. On EU units, connect the
appropriate electric plug to the end of the power cord.
Store wands on wand storage bracket with their discharge end in the
corresponding hole in the front of the reservoir cover.
WARNING:
Electric
Shock hazard
All servicing requiring
access to non-insulated
electrical components must
be performed by a factory
authorized technician.
DO NOT open any access
panel which requires the use
of tools. Failure to follow this
warning can result in severe
electrical shock.
CAUTION:
Risk of
Damage
DO NOT connect or energize
this appliance until all
installation instructions are
read and followed. Damage
to the appliance may result if
these instructions are not
followed.
CAUTION:
Hot Surface
Exposed surfaces can be hot
to the touch and may cause
burns.
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to SHIPPING DAMAGE
CLAIM PROCEDURE on the
inside front cover of this
manual.
INSTALLATION
AGENCY LISTING INFORMATION
4
, , and approvals for this appliance are pending.
INSTALLATION