Specifications

OPERATION (continued)
6
USE AND CARE
TRANSPORT OIL FOR DISPOSAL
Drain oil from frypot into filter unit. Roll filter unit to disposal
container.
Connect transfer wand to filter unit. Swing transfer wand over
disposal container. Be sure power switch is off, then connect filter
unit to electric power.
Press power switch to ON. Allow filter unit pump to run until as
much oil as possible has been pumped to disposal container.
Press the power switch to OFF.
Disconnect transfer wand from pump and connect to wand drain
fitting.
When dripping from transfer wand has stopped, disconnect and
stow wand.
DANGER:
BURN
HAZARD
Contact with hot shortening
will cause severe injury or
death. Wear eye protection,
protective gloves and clothing
and when operating or
servicing this fryer.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
IMPORTANT:
DO NOT push or pull the filter
unit by the wand or discharge
pipe. Always use the push
handle to maneuver the filter
unit into place.
IMPORTANT:
Be sure all shortening is
pumped from reservoir.
DO NOT allow shortening to
solidify in the reservoir.
When finished:
Wind power cord around
holding bracket.
Drain oil from wands
Store wands in storage
bracket.