Specifications

SERVICING INSTRUCTIONS (continued)
SERVICE
25
These servicing instructions are intended for use by qualified technical personnel only.
WARNING
Electric Shock
Hazard
Disconnect from electrical
power before removing any
panel or cover.
TOOLS REQUIRED:
#2 Phillips Screwdriver
Needle Nose Pliers
Container to hold
fasteners
CONTROL PANEL COMPONENTS
A. Access
Remove LOWER FRONT PANEL. Remove screws holding
UPPER FRONT PANEL to cabinet.
B. Controller
Disconnect two connectors from electrical compartment. Note
orientation of connectors.
Remove two screws holding controller to panel.
C. Indicator Lights
Disconnect wiring from light.
Collapse mounting tabs on light body. Withdraw light through front
of panel.
D. Power Switch
Note position of wires on switch. Disconnect wires.
Collapse mounting tabs on switch body. Withdraw switch with
switch guard through front of panel.
Reassemble in reverse order. Be careful that no wires are pinched
when reinstalling upper front panel.