Specifications

GENERAL
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
AGENCY LISTING INFORMATION 3
PRECAUTIONS & GENERAL INFORMATION 4
INSTALLATION
UNPACKING, INSPECTION and SET-UP 6
ELECTRICAL INSTALLATION 7
USE AND CARE
FRYER OPERATION 8
CLEANING INSTRUCTIONS 11
SERVICE & REPAIR
TROUBLESHOOTING SUGGESTIONS 16
EXPLODED VIEWS & PARTS LIST 18
WIRING DIAGRAM 20
SERVICING INSTRUCTIONS 23
PARTS & SERVICE INFORMATION 33
CUSTOMER SERVICE DATA 33
Thank you for purchasing this
Wells Manufacturing Co.
Pressure Fryer
Proper installation, professional
operation and consistent
maintenance of this appliance
will ensure that it gives you the
very best performance and a
long, economical service life.
This manual contains the
information needed to properly
install the fryer, to use and
care for the fryer, and to
service and repair the fryer in a
manner which will ensure its
optimum performance.
TABLE OF CONTENTS
ELECTRICAL
IMPORTANT: This appliance must be installed in compliance with all applicable federal, state and
local codes and ordinances.
DIMENSIONS
Height: 38" (top of work surface)
47" (overall)
52-1/2" (top of operating lever swing)
Width: 20"
Depth: 33"
35-1/4" (including operating lever)
SPECIFICATIONS
GENERAL
1
MODEL
VOLTS
50/60 Hz
WATTS
AMPS 3ø
POWER SUPPLY
REQUIREMENTS
L1 L2 L3 N
WFPE-68KFC
208V 3ø 10,500 29 29 29 n/a n/a
3-WIRE (L1, L2, L3) plus GND
Dedicated 50 amp 3ø circuit
8 ga. copper min. 90ºC
240V
1ø or 3ø
10,500 25 25 25 n/a 44
380-415V
3ø
10,500 14.6 14.6 14.6 0 n/a
3 NAC
(L1, L2, L3, N) plus GND
Dedicated 25 amp 3ø circuit
1.5 mm
2
copper min. 90ºC
AMPS
1ø