Specifications

SERVICING INSTRUCTIONS (continued)
SERVICE
32
MUFFLER COMPONENTS
A. Access
Remove UPPER REAR
PANEL.
B. Exhaust Hoses
Loosen CLAMPS. Work
hose up upper vent fitting
until hose clears vent filling
on muffler. Move end of
hose to the side, then work
hose off of upper fitting.
C. Muffler Assembly
Remove both exhaust hoses
per above, Lift muffler until
drain pipe clears cabinet,
then remove muffler from
cabinet toward rear.
Remove 10 nuts holding lid
to muffler. Remove lid
assembly.
GASKET lifts off.
D. Exhaust Vent
Remove four nuts holding VENT to cabinet. Remove vent. Note
that vent may be attached with sealant to cabinet top.
Reassemble in reverse order. Be sure to seal vent to cabinet top with
a thin bead of food-grade silicone sealant.
WARNING
Electric Shock
Hazard
Disconnect from electrical
power before removing any
panel or cover.
CAUTION
BURN
HAZARD
Allow fryer to cool. Be sure
all pressure is relieved before
proceeding.
TOOLS REQUIRED:
Flat Blade Screwdriver
7/16" Nut Driver
Container to hold
fasteners
Food-Grade Silicone Sealant
These servicing instructions are intended for use by qualified technical personnel only.