Specifications

OPERATION (continued)
16
C. TEMPERATURE OFFSET MODE
1. A user preference offset mode is provided should the user feel the
oven cooks too hot or too cold.
2. The OFFSET MODE can be used to offset the set / displayed
temperature from the sensed temperature by as much as ± 35ºF, in
5ºF increments:
a.
Rotate the TIME controller until the time digits on the display
read “00:00”.
b. Rotate the TEMP control until the temp digits display between
400º and 500º.
c. Press and hold the START TIMER key for ve seconds.
d. Turn either the TIME or TEMP control until the desired offset is
displayed.
e. Press the ACTUAL TEMP key to exit.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
BURN HAzARD
Do not attempt to clean
the oven until it has cooled
to 150ºF or less. See
CLEANING INSTRUCTIONS,
page 18.
CAUTION:
ELECTRIC
SHOCK HAzARD
DO NOT splash or pour water
onto control panel or wiring.
IMPORTANT:
To extend the life of your
appliance and internal
components, allow the oven,
and hotplates to cool to 200ºF
or less before turning the
ventilator off.
M506 2M-304964 Owners Manual WVOC-4H M506 2M-304964 Owners Manual WVOC-4H