Specifications

FEATURES & OPERATING CONTROLS (continued)

Item NO. Description Comments

VENTILATOR SECTION CONTROLS

V1 POWER SWITCH

V2 POWER ON INDICATOR

Energizes blower motor. If, after 10 seconds, proper conditions

are met, cooktop is energized.

V3 CHECK FILTERS ALARM INDICATOR GREEN. Glows when POWER switch is ON.

V4* REPLACE PREFILTER ALARM INDICATOR

AMBER. Glows if one or more lters are out of position.

Check all lters and bafes for proper installation.

V5* REPLACE FILTER PACK ALARM INDICATOR

AMBER. Glows when PREFILTER is approaching the end of its

service life and must soon be replaced.

V6* SERVICE REQUIRED ALARM INDICATOR

AMBER. Glows when FILTER PACK is approaching the end of

its service life and must soon be replaced. RED. Glows when

PREFILTER and/or FILTER PACK has reached the end of its

service life and is too loaded to allow sufcient air ow. Filter

MUST be replaced. Appliance is SHUT DOWN until expended

lters are replaced.

* See PRECAUTIONS & GENERAL INFORMATION, pages 6 & 7 for special procedures regarding prelters and lter packs.

COOKTOP SECTION CONTROLS - HOTPLATE

H.01 POWER ON INDICATOR

AMBER. Glows when associated temperature control is turned

ON.

H.02 HOTPLATE CONTROL Innite switch control of temperature of one hotplate section.

CONVECTION OVEN SECTION CONTROLS

C.01 POWER-OFF-FAN SWITCH Switch to turn oven ON, OFF or select FAN only.

C.02 FAN LOW-OFF-HIGH SWITCH Switch to turn fan ON, and to select fan speed.

C.03 OVEN POWER INDICATOR AMBER. Glows when oven is turned ON.

C.04 HEAT INDICATOR AMBER. Glows when heating elements are energized.

C.05 DIGITAL DISPLAY

Displays time and temperature information.

Time remaining in program (minute : second)

Programmed temperature (ºF)

C.06 OVEN TIME CONTROL Adjust programmed cooking time.

C.07 OVEN TEMP CONTROL Adjust programmed cooking temperature.

C.08 START TIMER KEY Begin a timed cook cycle.

C.09 ACTUAL TEMP KEY Press to display current oven temperature.

C.10 PGM KEYS Press to select pre-programmed time/temperature.

C.11 CANCEL KEY Press to cancel a program in progress.

M506 2M-304964 Owners Manual WVOC-4H