User Manual

9. Installation

Please find the optimal place of installation before you start to mount the Welltherm infrared panel heater.

Ensure that nothing will disable the function of the infrared waves and that all safety distances comply with our guidelines

(look chapter “safety advice”).

The Welltherm infrared heaters will only heat up solid materials which will also reflect the heat back to other solid materials.

It is recommended to mount the infrared panel in a way that it will directly ray on the persons.

Please find the additional advices in the text before.

After having chosen the area for mounting you have to start the mounting process as described below.

Step 1:

Deposit the packed Welltherm panel on the floor so that the label is on the upper side of the carton. Now open the cover plate

carefully. Lift the infrared heater on the side and take the drilling template out (it is under the panel). To reduce the danger of

damages please open the heater package in the room where you intend to install the heater.

Note that an exact positioning of the screws is the basic for the simple and trouble-free assembly.

Important:

The drilling template has 5 drills for marking. Depending on the orientation of the heating element the upper drills are relevant

for wall mounting. The central drills are the markings for the optional ceiling mount holders.

For marking the holes the drilling template is provided with cuttings (see picture above).

Step 2

Hold the drilling template on the wall/ceiling and orientate it by using a water

level.