User Guide

8
4.6 Stop working & sync data
Unplug the sensor cable, the
countdown on the screen will begin.
During the countdown, if you plug the sensor cable
again, the record will be resumed.
After the countdown, the data will be ready for sync.
Notice:
 If the working time is less than 2 minute, there will
be no data saved
 If the device power off during working, the data
should have been saved.
Sync data:
 After the countdown, run App to sync data; If app
has already opened, go to History page to sync
data.
 You can also sync data later. The built-in
memory can store 4 sessions. The oldest will be
overwritten by the 5th. Please sync data to your
phone in time.
Notice: The built-in memory can store 4 sessions, up to
10 hours for each. It will start the next session
automatically after 10 hours monitoring.
4.7 Screen wake up / change display
During measurement, the screen will go off
automatically for saving power; you can press the side
button to wake up the screen or change display.
4.8 Bluetooth Connection
The device Bluetooth will be enabled automatically
after it’s turned on.