User Guide
Table Of Contents
- 1Tips for Safe Sleep
- 2Warnings and Cautions
- 3Unpacking
- 4Using the device and App
- 4.1Download App
- 4.2Charging
- 4.3POWER ON/OFF
- 4.4 Placement Guide before working
- 4.5Start working
- 4.6Stop working & sync data
- 4.7Screen wake up / change display
- 4.8Bluetooth Connection
- 4.9Add a new device
- 4.10App Dashboard
- 4.11Audio reminder in Device
- 4.12Audio reminder in App
- 4.13View Report
- 4.14App Offline Mode | Multiple Devices
- 5PC software
- 6Maintenance
- 7Troubleshooting
- 8Specifications
7
After a few seconds, readings will be displayed on the
screen.
If the screen display “poor signal”, please check if the
sensor has been positioned and secured properly.
When the above symbol displays on device screen, it
indicates the readings is unavailable right now.
When at rest, there will be readings in a few seconds. If
you can’t get readings for a long time, it may be caused
by:
Improper sensor placement
Frequent movement
Foot is too cold
Run App to connect the device, you can check the real-
time readings in App Dashboard. (The detail of using
App will be illustrated later)
Notice:
If the working time is less than 2 minute, the data
will not be saved.
Motion may cause readings unavailable. Readings
recover very soon at rest.
Please avoid strong ambient light condition.