Datasheet

Ɏ
ɎɎ
Ɏ
Environmental Characteristics
Requirement
Item
±
±±
±
1% and Below
±
±±
±
5%
Jumper
Test Method
Temperature Coefficient of
Resistance (T.C.R.)
As Spec.
JIS-C-5201-1 4.8
IEC-60115-1 4.8
-55
°
C~+125/+155
°
C, 25
°
C is the reference
temperature
Short Time Overload
±(1.0%+0.05ȍ) ±(2.0%+0.05ȍ)
<50mȍ
JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. overload voltage for 5 seconds, 2
seconds for high power series
Insulation Resistance
≥
10G
JIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. overload voltage for 1 minute
Endurance
±(2.0%+0.10ȍ) ±(3.0%+0.10ȍ)
<100mȍ
JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
70
±
2
°
C, Max. working voltage for 1000 hrs with 1.5 hrs
“ON” and 0.5 hrs “OFF”
Damp Heat with Load
±(2.0%+0.10ȍ) ±(3.0%+0.10ȍ)
<100mȍ
JIS-C-5201-1 4.24
40±2°C, 90~95% R.H. Max. working voltage for 1000
hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
Dry Heat
±(1.0%+0.05ȍ) ±(1.5%+0.10ȍ)
<50mȍ
JIS-C-5201-1 4.23
IEC-60115-1 2.23.2
at +125/+155°C for 1000 hrs
Bending Strength
±
(1.0%+0.05ȍ)
±
(1.0%+0.05ȍ)
<50mȍ
JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds
2010, 2512 sizes: 2mm Other sizes: 3mm
Solderability 95% min. coverage
JIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
Resistance to Soldering Heat
±(0.5%+0.05ȍ) ±(1.0%+0.05ȍ)
<50mȍ
JIS-C-5201-1 4.18
IEC-60115-1 4.18
260
±
5
°
C for 10 seconds
Voltage Proof No breakdown or flashover
JIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times RCWV (RMS) for 1 minute
Leaching
Individual leaching area Љ5%
Total leaching area
Љ
10%
JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260±5°C for 30 seconds
Rapid Change of
Temperature
±(0.5%+0.05ȍ) ±(1.0%+0.05ȍ)
<50mȍ
JIS-C-5201-1 4.18
IEC-60115-1 4.18
-55°C to +125/+155°C, 5 cycles
Storage Temperature: 25±3°C; Humidity < 80%RH
WELTRON Elektronik GmbH // Tel: [phone] // Fax: [phone] // E-Mail: [e-mail]
WELTRON Elektronik GmbH // Tel: [phone] // Fax: [phone] // E-Mail: [e-mail]