Data Sheet

6mm carbon potentiometers with plastic housing and Ingress
Protection rating type IP 54 (high level of protection against dust
and also against water splashing), according to IEC 60529. Plastic
materials can be self-extinguishable according to UL 94 V-0 under
request.
Through-hole and SMD configurations are available. Terminals and
collector are normally manufactured in tinned brass, although versions
with steel terminals are also available under request. Terminals for
through-hole models can be provided straight or crimped, which
helps hold the component to the PCB during soldering.
Tapers can be linear, log and antilog; special tapers can also be
studied.
ACP’s potentiometers can be adjusted from either the front or the
back, both in the horizontal and the vertical adjustment types.
Thumbwheels and shafts can be ordered either separately or already
inserted in the potentiometer.
Potentiometers can be manufactured in a wide range of possibilities
regarding:
- Resistance value.
- Tolerance.
- Tapers / variation laws.
- Pitch.
- Positioning of the wiper (standard is at 50% rotation).
- Housing and rotor color.
- Mechanical life.
- Self-extinguishable plastic parts according to UL 94 V-0 under
request.
Applications
6mm potentiometers are mainly used in trimming applications,
in different markets:
- Industrial: Timers and relays, dimmers, adjustment of output.
- Electronic appliances: volume regulation, temperature controls
and function selection.
- Automotive: Lighting regulation, dimmers.
- Measurement and test equipment.
- Telecommunication equipment (antenna amplifiers and receivers,
videocomm, intercomm).
- Alarm systems.
CARBON – CA6
Specifications on this catalog are for reference only, as they are subject to change without notice.
15
www.acptechnologies.com
CA6