TM Holmes Narrow Bookcase SKU# WEHOL41OS2 For Residential Use Only Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Copyright © 2024 by Walker Edison Furniture Co., LLC. All rights reserved.
Time to get started Set up a clean and soft workplace to get started and avoid damage during the assembly. It also helps to double-check you’ve got all the pieces and parts before diving in to assembly. Estimated time for assembly 100 Mins People recommended for assembly Make it a team effort! Grab a friend for quicker, easier assembly.
Parts List Part Number Description Quantity 1 Left Panel 1 2 Right Panel 1 3 Support Panels 3 4 Upper Shelf Panel 3 5 Front Shelf Trim 4 6 Lower Shelf Panel 1 7 Bottom Cabinet Panel 1 8 Left Cabinet Panel 1 9 Right Cabinet Panel 1 10 Back Cabinet Panel 1 11 Left Drawer Panel 1 12 Right Drawer Panel 1 13 Back Drawer Panel 1 14 Bottom Drawer Panel 1 15 Front Drawer Panel 1 3 5 4 1 5 2 4 5 4 5 6 10 8 9 7 3 3 13 11 14 12 15 3
Hardware List Size Name Quantity A 8x30mm Wooden dowel 22 B 6x30mm Wooden dowel 8 C 6x35mm Cam Bolt 22 D 15x11mm Cam Lock 18 E 15x9mm Cam Lock 4 F 6x50mm Bolt 4 G 6x30mm Bolt 8 H 6x15mm Bolt 24 L-shape Bracket 12 Part J K M4x57mm Hex Key 1 L 4x38mm Screw 12 Drawer Pull 1 Screw 14 M N 3x12mm 4
Hardware List Part Size P Name Quantity Plastic Wedge 6 Q 3x17mm Screw 6 S 10" Drawer Glide* 1 Set * Note: This piece comes preassembled for shipping purposes and must be disassembled to complete the desk assembly. T 4x25mm Screw 2 U 4x12mm Screw 2 V Wall Anchor 2 W Plastic Strap 2 Sticker 22 Glue Tube 2 X Y 30mm The hardware quantities listed above are required for proper assembly. Extra hardware pieces may be included.
Step 1 Let’s get this ball rolling. Attach Cam Bolts (C) to the Left Panel (1) and Right Panel (2).
Step 2 Insert Cam Bolts (C) into the Lower Shelf Panel (6). Then insert Wooden Dowels (A) into the dowel holes on the four pieces of Front Shelf Trim (5) and three pieces of Support Panels (3).
Step 3 Attach the L Shape Brackets ( J) to the Upper Shelf Panels x3 (4) using 15mm Bolts (H).
Step 4 From your Drawer Glides, you will detach the Drawer Members from the Cabinet Members. You can do so by pushing up on the plastic lever.
Step 5 Attach Drawer Glides (S) to the Left Cabinet Panel (8) and Right Cabinet Panel (9) using 12mm Screws (N). Insert Wooden Dowels (A) into side dowel holes.
Step 6 Attach Front Shelf Trim x4 (5) to Upper Shelf Panels x3 (4) and Lower Shelf Panel (6) using 38mm Screws (L).
Step 7 Attach the Left Cabinet Panel (8) and the Right Cabinet Panel (9) to the Bottom Cabinet Panel (7) using 50mm Bolt (F).
Step 8 Slide Back Cabinet Panel (10) into place using guides.
Step 9 Attach Bottom Shelf (6) to Left Cabinet Panel (8) and Right Cabinet Panel (9). Lock into place with Cam Locks (D). 6 D D D D 8 9 Tip Cam Locks Cam Locks help securely join two pieces together. Follow these easy steps. 1 1: Insert Cam Bolt into bolt holes on the flat side.Don't over tighten! 2 2: Fit the proper holes on the edge of the other part over the Cam Bolts. You should be able to see the cam bolts through the larger hole on the side.
Step 10 Now, we’ll attach shelves and the cabinet unit to the Right Side Panel (2). See graphic for proper order of shelves. Attach Front Shelf Trim x4 (5), & Support Panels x3 (3) with Cam Locks (D). Secure with screwdriver. Next, attach L Shape Brackets ( J) on Upper Shelf Panels (4) to the Right Side Panel (2) using 15mm Bolts (H). Lastly, connect the Right Cabinet Panel (9) to the Right Side Panel (2) using 30mm Bolts (G).
Step 11 Repeat these steps for the other side. Attach Front Shelf Trim x4 (5) & Support Panels x3 (3) with Cam Locks (D). Secure with screwdriver. Next, attach L Shape Brackets ( J) on Upper Shelf Panels (4) to the Left Side Panel (1) using 15mm Bolts (H). Lastly, connect the Left Cabinet Panel (8) to the Left Side Panel (1) using 30mm Bolts (G).
Step 12 Attach the front of the Left Drawer Panel (8) and the Right Drawer Panel (9) using 30mm Bolts (G).
Step 13 Evenly place Plastic Wedges (P) into the gaps between the Back Cabinet Panel (10) and the frame. Attach the Plastic Wedges with the 17mm Screws (Q).
Step 14 Attach Cam Bolts (C) to the Front Drawer Panel (15) and insert Wooden Dowels (B) into the Back Drawer Panel (13). Attach the Drawer Pull (M) to the Front Drawer Panel (15) using 12mm Screws (N).
Step 15 Attach the Drawer Members from your Drawer Glides (S) to the Left Drawer Panel (11) and Right Drawer Panel (12) using 12mm Screws (N).
Step 16 Connect the Left Drawer Panel (11) and Right Drawer Panel (12) to the Back Drawer Panel (13). Secure with 38mm Screws (L).
Step 17 Slide in the Bottom Drawer Panel (10) using the guides. Attach Front Drawer Panel to the Left Drawer Panel (11) and Right Drawer Panel (12) using Cam Locks (E).
Step 18 Cover any visible Cam Locks (E) with Stickers (X).
Step 19 Insert drawers into place by lining up the cabinet member and drawer member pieces of your Drawer Glides (S). Tip Reinserting your Cabinet Glides together Line up the Drawer Member so it is inside the guides of the Cabinet Member. Once the connection is made, push the drawer into place entirely. It may not be a smooth glide on your first try, but will improve after it’s fully inserted.
Step 20 Use the adjustable feet to create a level writing surface.
Step 21 Great work, you’re in the home stretch. Let’s secure your bookcase to the wall. Attach the Plastic Strip (W) to your bookcase using the 12mm Screw (U).
Step 22 Insert the Wall Anchor (V) into the wall. Next, secure the Plastic Strip (W) to the wall using the 25mm Screw (T). 1 2 3 V T W Warning Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
Final Assembly Congratulations on your new piece of furniture! We would love to hear about it and see it.
Assembling furniture can be tricky sometimes. Our customer service team, located in Utah, is here for product information, help assembling a product, or for any other customer support issue Call us at 801-433-3008 Email us at service@walkeredison.com Visit our Customer Service website at walkeredison.
