Instructions / Assembly

ManualsBrandsWelwick Designs ManualsEntryway Benches48 in. Dark Walnut Industrial Angle Iron Entry Bench

P.1

Assembly Instructions

Item # : B48AIEB

Revised 16/07/2019(L)

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Walker Edison

201

Summary of content (9 pages)

PAGE 1
Item # : B48AIEB Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, Revised 16/07/2019(L) or request parts. www.walkeredison.com Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main type of hardware used to assemble this product are: bolts and screws. V. Power tools should not be used to assemble this product. VI. Drill may be needed for securing product to wall.
PAGE 4
Hardware List A Ø1/4x12mm Bolt 12 pcs B Ø1/4x30mm Bolt 2 pcs C M4 Hex Key 1 pc The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 6
Step 2 4 A 3 A 4 4 A 4 A C Using bolt (A) secure part (4) into part (3) with hex key (C)as per diagram. Note：Do not fully tighten all the bolts until you finish assembling all parts .Once assembled ,go back to fully tighten all bolts .This will make the assembly easier . Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 7
Step 3 4 A 2 A A 4 4 A 4 C Using bolt (A) secure part (4) into part (2) with hex key (C) as per diagram. Then fully tighten all the bolts. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 8
Step 4 Position the assembled unit at the desired location .If necessary, adjust the floor levelers at the bottom of the legs (4) to the level the unit . Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.