Using bolts (A) attach parts (1,9) into parts (2,4,6) with hex key (J) as per diagram. Note: Do not fully tighten all the bolts .
Using bolt (C) secure part (5), then using bolt (A) attach part (4) into part (3) with hex key (J) as per diagram. Fasten all the bolts .
Using bolt (C) attach bracket (E) into part (2) with hex key (J) as per diagram.
Screw out the bolt from hook then using bolt attach hook (K) into part (7) with Philips head screwdriver as per diagram .
Secure screw (B) attach part (7) into parts (2,3,6) with Philips head screwdriver as per diagram.
Secure screw (B) attach part (8) into part (1,7,9) with Philips head screwdriver as per diagram.
Put and adjust the adjustable floor leveler as per diagram. Position the assembled unit at the desired location .if necessary ,adjust the floor leveler at the bottom of the side frames to level the unit .
Put anchor (H) into the wall and then using screw (G) secure (F,E) into anchor (H) in the wall as per diagram .