Item # : OREGGCH Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 20/12/2019 (E) Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Outdoor Furniture Care / Cleaning Guidelines Our patio furniture is designed to be enjoyed for years to come, and while many of our products are weather resistant, UV protected, and water resistant, they still need some care to keep them looking great. Follow these simple tips to maintain the function and appeal of these products. I.
Parts List 1 2 4 3 6 5 7 Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A M10x35mm Bolt 1 pc B M8x60mm Bolt 1 pc C M8mm Flat washer 2 pcs D M8mm Nut 1 pc Bolt cap 1 pc E F M5 Hex Key 1 pc G M8 Hex Key 1 pc H Wrench 1 pc J Iron bolt 1 pc K Spring hook 1 pc L Iron ring buckle 1 pc M Iron chain 1 pc Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.
Step 1 A 3 G 5 7 Insert part (3) into part (5) and then insert part (3) into part (7),using bolt (A) secure part (7) to part (3) to part (3) with Hex Key (G) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 1 B C 1 F 3 3 D E C H Insert part (1) into part (3) ,place the bolt (B) with Flat washer (C) across parts (1,3) ,keep Hex key (F) into the head of bolt (B) and using wrench (H),tighten Nut (D) with flat wash (C) to bolt (B) to fix part (1,3) together ,using bolt cap (E) cover the Nut (D) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 J K J 1 Insert Iron bolt (J) into part (1) ,then place spring hook (K) into iron bolt (J) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 4 K M L M Place Iron Chain (M) to part (K) ,then connect iron ring buckle (L) to part (M) as per diagram. Note:Please keep the iron ring buckle open. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 5 L 2 2 L H Pick up part (2) into Iron ring buckle (L) ,then secure and tighten iron ring with Wrench (H) buckle as per diagram. Note : If you want to adjust the seat height ,you can adjust height phase of chain (M)to place the iron ring buckle to adjust the seat height . If you want to adjust the seat height. Fasten the iron ring buckle (L) lay down part (2) and choose the desired phase of iron chain (M) for placing iron ring buckle (L) and repeat this step .
Step 6 2 6 4 Put parts (4,6) as per diagram, then tighten all the belts to part (2). Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 7 Final Assembly Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.