General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. The provided glue is to secure wood dowels in place.
Insert wooden dowel (A) into parts (4,5,12,13,14,22) as per diagram.
Insert wooden dowel (A) into part (3), secure cam bolt (D) into parts (1,3,4,5) with Philips head screwdriver as per diagram.
Pick up the slider arm (Z) and separate the slide Runner for the following Steps. Extend the Slide .Runner all the way forward,press the plastic release lever of the alider arm up and pull the Slide Runner Complete out .
Using screw (L) attach part (Z) into parts (4,5) with Philips head screwdriver as per diagram.
Using screw (L) attach part (Z) into parts (12) , then using screw (L) attach part (Z) into parts (18,19) with Philips head screwdriver as per diagram.
Using bolt (E) attach part (3) into part (12) with hex key (F) as per diagram.
Using cam lock(C) secure parts (4,14) to part (3) with Philips head screwdriver as per diagram.
Using cam lock(C) secure parts (5,13) to part (3) with Philips head screwdriver as per diagram.
Step 9 15 4 3 15 14 5 Put part (15) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 10 15 4 13 15 14 5 2 E F Using bolt (E) attach part (2) into parts (4,5,13,14) with hex key (F) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 11 24 23 23 24 G F G Using bolt (G) attach part (24) into part (23) with hex key (F) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 12 24 2 23 23 24 H F Using bolt (H) attach parts (23,24) into part (2) with hex key (F) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 13 4 16 3 5 Put part (16) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 14 2 3 1 C 5 C 16 C C C 12 C 4 Using cam lock (C) secure part (1) into parts (4,5,12) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 15 R S R Using screw (S) secure plastic wedge (R) with Philips head screwdriver as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Using screw (L) attach handle (U) to part (17) with Philips head screwdriver as per diagram.
Step 17 x2 19 M M 20 18 M M Using screw (M) attach parts (18,19) to part (20) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 18 x2 19 21 20 18 Put part (21) as per diagram. Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Using screw (M) secure part (20) to part (22) with Philips head screwdriver as per diagram.
Using cam lock (B) secure part (17) to parts (18,19) , then using cam lock (C) secure part (17) to part (22) with Philips head screwdriver as per diagram.
Step 21 Q Q Q Q Q Q Place sticker (Q) cover the holes as per diagram . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 22 Slider arm OR Slider bracket Insert the assembled drawers into the unit frame, extend the Ball Bearing Slide Tracks on the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled drawers with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the drawer does not go in smoothly, please take it out and repeat the step.
Step 23 N 5 N N 4 N N N P P P 13 N 14 N P 8 7 6 N N Insert shelf support pins (N,P) into unit as per diagram. Make sure you place the four shelf support pins (N,P) in the same level. So the shelf is not titled .Put parts (6,7,8) into unit as per diagram.Tilt and rest the adjustable shelf (6,7,8) onto the shelf support pins . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 24 J K L L L J U U U 11 L L L 10 K J 9 K J K J K K J Using screw (K) attach Europe hinge (J) into parts (9,10,11) ,then using screw (L) attach handle (U) to parts (9,10,11) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 25 9 4 14 10 5 11 K J Using screw (K) attach Europe hinge (J) into parts (4,5,14) with Philips head screwdriver as per diagram. Open and close the doors ,if necessary adjust the screws for a good fit. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 26 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the legs to level the unit . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 27 1 X V Using screw (V) attach Velcro strap (X) into part (1) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 28 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall Y W X Using screw (W) attach Velcro strap (X) into Nut (Y) to wall with Philips head screwdriver as per diagram.
Step 29 Final Assembly Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.