BR9DRLEEDR Assembly Instructions Please visit our website for the most current instructions, assembly tips, to report damage or request parts. www.walkeredison.com Revised 11/2021 Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
Parts List 8 1 3 5 14 5 22 22 14 17 24 17 22 The side drawer with WARNING LABEL, should be mounted in highest drawer.
Hardware List A Ø8*20mm Wooden dowel 36 pcs B Ø8*30mm Wooden dowel 127 pcs C Ø3,0*12mm Screw 30 pcs D Ø4,0*25mm Screw 36 pcs E Ø4,0*30mm Screw 112 pcs F Ø4,0*40mm Screw 23 pcs G Ø7,0*70mm Screw 05 pcs H - Hex Key 01 pc I - Glue 01 pc J - Handle 15 pcs K - Ø6mm 01 pc L - Washer 02 pcs M - Wall anchor 01 pc N 1454 mm ‘H’ Profile 01 pc O Ø8,0*8mm Nail 46 pc Hammer recommended for assembly (not included) Philips head screwdriver required for assembly
Step 1 18x 13 A A 3 B B B B 4 B B B B B B B 1 B B B B B B B B 8 2x B 2x B 17 B B B 5 B B B 4x 2x 22 9 B B B B B 3x B 19 24 B 3x B 6x 11 B B B B 20 B B Please assemble on a clean soft surface to avoid damage. 6x 12 B B Insert Wooden dowel (A) and glue (I) into part (13). B Insert Wooden dowel (B) and glue (I) into part (1), (3), (4), (5), (8), (9), (11), (12), (17), (19), (20), (22) and (24). A Ø8*20mm B Ø8*30mm I 36 91 01 P.
Step 2 D D D D 13 13 D D 13 3 D D 13 D 13 D 3 P D TO 13 D D 13 13 Secure parts (13) to part (3) and (4) with screw (D) and screwdriver (not included). D 13 D D D 4 TO P D Ø4,0*25mm 16 Step 3 8 8 1 F 1 F Please assemble on a clean soft surface to avoid damage. F Secure part (8) to part (1) with screw (F) and screwdriver (not included). Ø4,0*40mm 02 P.
Step 4 1 E E 5 E E E 5 5 E 1 E Ø4,0*30mm Secure part (5) to part (1) with screw (E) and screwdriver (not included). 06 Step 5 5 F 17 5 F 5 F F 5 17 F 8 17 F 17 Secure part (17) to parts (5) with screw (F) and screwdriver (not included) in the pre holes. F Ø4,0*40mm 04 P.
Step 6 17 24 E E 17 24 E 17 Secure part (24) to parts (17) with screw (E) and screwdriver (not included). E Ø4,0*30mm 02 Step 7 22 22 E E E 17 24 17 Secure parts (22) to part (24) with screw (E) and screwdriver (not included). 1 E Ø4,0*30mm 02 P.
Step 8 E E E E E 17 E E 4 22 17 22 1 E Secure parts (1), (17), and (22) to part (4) with screw (E) and screwdriver (not included). E Ø4,0*30mm 07 Step 9 E E 24 22 22 Secure parts (22) to part (24) with screw (E) and screwdriver (not included). E E Ø4,0*30mm 02 P.
Step 10 E 1 17 22 E 22 E E E E E 17 E 3 Secure parts (1), (17) and (22) to part (3) with screw (E) and screwdriver (not included). E Ø4,0*30mm 07 Step 11 16 F 2x 9 F F 9 Secure part (9) to parts (16), with screw (F) and screwdriver (not included). 16 F Ø4,0*40mm 04 P.
Step 12 10 16 F F F 16 Secure parts (10) to parts (16), with screw (F) and screwdriver (not included). 10 F Ø4,0*40mm 02 Step 13 F 10 16 9 F F 10 16 Secure the part (1) to part (16), with screw (F) and screwdriver (not included). F Ø4,0*40mm 02 P.
Step 14 G H G G 16 2 G G 16 G Ø7,0*70mm 16 Secure part (2) to part (16) with screw (G) and hex key (H). 04 01 H Step 15 E H E 10 9 E G G E E 9 2 E 25 E E E 10 E E Atach part (25) to part (2) with screw (G) and hex key (H). Secure parts (9) and (10) to part (2) and attach with screw (E) and screwdriver (not included). E Ø4,0*30mm G Ø7,0*70mm H 10 01 01 P.
Step 16 4 F F 24 F F F 3 2 F F Secure part (2) to part (3), (24) and (4) with screw (F) and screwdriver (not included). F 3 F F Ø4,0*40mm 09 F Step 17 8 4 Atach part (8) to part (3) and (4) with screw (E) and screwdriver (not included).
Step 18 5 13 D 13 13 13 13 5 5 13 13 13 24 13 13 13 Secure parts (13) to parts (5) and (24) with screw (D) and screwdriver (not included). D Ø4,0*25mm 20 P.
Step 19 11 E E E 12 E E 7 12 11 E E E 6 E 11 7 E 6 11 E Ø4,0*30mm 6x 12 15 Secure part (11) and (12) to part (6) with screw (E) and screwdriver (not included). Insert part (15) and (7) betweenparts (11) and (12). Secure part (7) with screw (E) and screwdriver (not included). 48 Step 20 6x J C C J 6 C C C Ø3,0*12mm Secure handle (J) with screw (C) and screwdriver (not included), in the pre holes on the drawer front. J 24 12 P.
Step 21 21 3x E E E E E 19 E 20 21 E 20 19 E E E E 18 19 21 23 20 19 18 Secure part (20) and (19) to part (18) with screw (E) and screwdriver (not included). Insert part (23) and (21) between parts (19) and (20). Secure part (21) with screw (E) and screwdriver (not included). E Ø4,0*30mm 24 Step 22 3x J C C 18 C Ø3,0*12mm Secure handle (J) with screw (C) and screwdriver (not included), in the pre holes on the drawer front. J 06 03 P.
Step 23 B B B B B B 13 B B B B B B B B B B B B 13 B 25 Insert wooden dowel (B) into part (13) to be the stop of the drawer. B Ø8*30mm 18 P.
Step 24 Drawer Stop Make sure dowel is flush with panel. Insert wood dowel (B) on the inside of all drawers while drawer is inside the unit. B The side drawer with WARNING LABEL, should be mounted in highest drawer. B B B B B B B B B B Ø8*30mm 18 P.
Step 25 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Atach screw (E) into washer (L), securing wall anchor (M) at the top middle part (1).
Step 26 15 lbs 75 lbs 20 lbs Assembly Complete! Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1.Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer. (Wax should be room temperature, do not melt the wax onto the wood) 3.