User's Manual

WEMISS LY-E1
USER MANUAL
Ear-tips
Changing Box
Earbuds
PACKING LIST
- 01 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 -
- 02 -
- 03 -
- 04 - - 05 - - 06 -
User Manual
Warranty Card
Type-C Interface
Charging Cable
Thank you for purchasing the WEMISS LY-E1 True Wireless Stereo
earbuds. Please read this user manual carefully and keep it for future
reference. If you need any assistance, please contact our support team
with your product model number and Amazon order number.
TECHNICAL PARAMETERS
Product Number
Bluetooth Version
Charging Time
Life Time
Earphones Impedance
Maximum Output Power
Frequency Range
Microphone Sensitivity
Battery Capacity
Bluetooth Effective Distance
Product Weight
Charging Voltage
WEMISS LY-E1
5.0
≈2h
≈30h
≈5h
32Ω
5mW
20Hz-20KHz
-42dB@1KHz
500mAh
10m
35g
DC_5 V
A2DP / AVRCP/HSP/ HFP Bluetooth Protocol
PRODUCT DETAILS
Please charge the earbuds and the charging case for at least 15 minutes
before first use.
LED Indicator Light
Muti-Funtion Touch Panel
LED Charing Indicator
USB-C Charging Port
LISTENING COMFORT
Select the right size ear tip
Please choose the right size ear
tip for a comfortable fit and
audio seal for the ultimate
audio playback. Lightly pull the
ear tip off and remove it from
the earbuds, and install a new
suitable ear tip.
Wearing earbuds
Lightly insert the earbuds into
the ear and adjust it to a
comfortable angle by rotating
the earbuds (“R” is for the right
ear and “L” for is the left ear)
BATTERY LIFE AND CHARGING
Battery life
In Bluetooth mode only, a single play can last up to 5 hours, and the total
battery life can reach 30 hours with charging case.
Earbuds charging
Put the ear buds in the charging case and they will automatically shut
down and enter the charging state.
Charging case charging
PLAYBACK CONTROLS
Touch control
Music Play/Pause
Next track
Volume + -
Answer
Hang up
Decline Call
Activate Voice Assistant
Left ear
Right ear
Tap Tap
Double tap Double tap
Tap Tap
Long press 3 sec
Long press
Volume reduction
Long press
Volume plus
Long press 3 sec
Long press 2 sec Long press 2 sec
Tap 3 Times Tap 3 Times
Model: LY-E1
Shenzhen Aukeyhi Technology co., Ltd.
www.wemisscn.com | [e-mail]
Room 201, Block A, No.1, Qianwan Road 1,
Qianhaishengang Cooperative District,
Shenzhen, 518000, China
Designed by WEMISS
FCC ID: 2AXV5-LY-E1
BLUETOOTH FEATURES
Automatic remote connection
1. When you turn on the earbuds, they will automatically reconnect to the
last-paired device or enter pairing mode if no paired devide is found.
2. To clear the pairing list, take the right earbud out of the charging case,
and then tap and hold the touch-sensitive panel on the right earbud for
10 seconds until the LED indicator blinks red 5 times. After that, put the
earbud back in and take it out again to enter pairing mode.
3.In pairing mode, the earbuds will automatically turn off after 5 minutes
if no devices are paired.
4. The earbuds are automatically turned off when placed in the charging
case.
5. In the connected state, disconnect the Bluetooth Connection, it will
automatically enter the pairing state.
NOTE:
● If one of the earbuds has no sound output, put both earbuds back into
the charging case and take them out again.
● The maximum wireless operating range is 10m (33ft). If you exceed
this range, the earbuds will disconnect from your paired device. The
connection will be re-established if you re-enter the wireless range within
5 minutes. The earbuds will automatically reconnect to the last-paired
device. To connect with other devices, repeat the previous pairing steps.
SAFETY INSTRUCTIONS
1. Do not place earbuds in extremely high or low ambient temperatures for
extended period of time. Extrem temperature will cause the device deform.
2. Thunderstorm weather may affect the normal use of the earbuds and
there will be a risk of electric shock, so please do not use the earbuds
during thunderstorms.
3. This product contains small parts. Do not swallow it. Keep the product
out of the reach of children.
4. Using the earbuds for a long time at high volume may affect your
hearing. Please control the volume when using the earbuds.
BATTERY WARNING
This product contains lithium battery, please do not disassemble, impact,
squeeze or put into fire. Please do not place the product under high
temperature or hot sun, beware of explosion. If there is swelling, leakage,
odor or any other abnormality in the battery compartment of the product,
do not continue to use it. Please dispose of used batteries properly in
accordance with local regulations.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
FCC RF EXPOSURE STATEMENT:
CAUTION!
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ISEDC STATEMENT
ISEDC RF EXPOSURE STATEMENT:
The device is compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.
LE PRÉSENT APPAREIL EST CONFORME
Après examen de ce matériel aux conformité ou aux limites d’intensité de
champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences
et la conformité and compliance d’acquérir. les informations correspon-
dantes.
This device complies with Innovation, Science, and Economic
Development Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et
Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil nedoit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionne-
ment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe b est conforme à la norme nmb - 003
du canada.
80*80mm
风琴折