Setup Guide

QR Code
SETUP GUIDE
To get started
Download and launch the Wemo
App to set up your Wemo
iPhone users will be prompted
to scan or type this HomeKit
Setup Code
What does the light color tell me?
The light is o when your Wemo is
connected to Wi-Fi and working normally.
The light alternates between white
and orange when your Wemo is ready
for setup.
The light will be solid white for 30
seconds when setup is successful and
your Wemo is on.
The light blinks white during a
firmware update.
The light is orange if the Wi-Fi signal
is weak. Move your Wemo closer to
your router.
The light blinks orange if your Wemo is
not connected to Wi-Fi. Unplug your
router and Wemo and plug them back in.
Got questions?
Visit wemo.com/support or
call us at 1-844-745-WEMO
for support.
For warranty information, go
to wemo.com/warranty
SAFETY WARNING
Wemos are not designed for use
with water pumps or heating
appliances. Do not use Wemos
with anything that might be
dangerous if left unattended.
8820-02983 Rev. A00
352.42 x 279.40 x 126.21
Business Unit:
Program Manager:
Packaging Engineer:
Material:
Blank Size (in):
Side Shown:
L x W x D (mm):
DIE LAYOUT
A
Unit:
Flute/Grain:
REV
Intermediate
PRINT SIDE
13+7/8 x 11 x 4+31/32
L x W x D (in):
7100-00267 Rev.A00
QIG
QIG
Material: 300 GSM C2S
Double sided tape
Screen Glue
Insert
OUTSIDE VIEW
Material : 350 GSM C1S
P#
BOM - F7C063
Outer box
Refer Artwork
Hanger folded in the case pack
Wafer seal (2 pc)
25 mm
Refer Artwork
Refer Artwork
Material: 29 ECT E flute 300 gsm SBS laminated
34.29
[1+11/32]
79.75
[3+1/8]
PET 0.5 mm
131.76
[5+3/16]
104.78
[4+1/8]
74.61
[2+15/16]
Front
Back
195.26
[7+11/16]
112.71
[4+7/16]
228.09
[8+31/32]
367.68
[14+15/32]
114.3
[4+1/2]
63.5
[2+1/2]
75.91
[3]
IN/MM
Drawing Scale 1:1
Retail Outside Dimension (Including Hang Tab)
DO NOT PRINT
DIE LINES, PRINTERS NOTES
PRINT SPECS:
DIE/MATERIAL SPECS:
1292.733 x 568.208
50.895 x 22.370
Die Line File:
NET-Networking
Pushpak Jain
Please refer to drawing
F7C063_WEMO MINI V2_ PACKAGING COST DOWN
Color Plates:
Notes:
Artwork File:
horizontal
00
RELEASE DATE:
11/26/2019
Tolerance:+/- 1/32" - 0.8mm
Blank Size (mm):
Finish:
DIELINE:
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
This dieline works for following skus (if any):
352.42 x 279.40 x 126.21
Business Unit:
Program Manager:
Packaging Engineer:
Material:
Blank Size (in):
Side Shown:
L x W x D (mm):
DIE LAYOUT
A
Unit:
Flute/Grain:
REV
Intermediate
PRINT SIDE
13+7/8 x 11 x 4+31/32
L x W x D (in):
7100-00267 Rev.A00
QIG
QIG
Material: 300 GSM C2S
Double sided tape
Screen Glue
Insert
OUTSIDE VIEW
Material : 350 GSM C1S
P#
BOM - F7C063
Outer box
Refer Artwork
Hanger folded in the case pack
Wafer seal (2 pc)
25 mm
Refer Artwork
Refer Artwork
Material: 29 ECT E flute 300 gsm SBS laminated
34.29
[1+11/32]
79.75
[3+1/8]
PET 0.5 mm
131.76
[5+3/16]
104.78
[4+1/8]
74.61
[2+15/16]
Front
Back
195.26
[7+11/16]
112.71
[4+7/16]
228.09
[8+31/32]
367.68
[14+15/32]
114.3
[4+1/2]
63.5
[2+1/2]
75.91
[3]
IN/MM
Drawing Scale 1:1
Retail Outside Dimension (Including Hang Tab)
DO NOT PRINT
DIE LINES, PRINTERS NOTES
PRINT SPECS:
DIE/MATERIAL SPECS:
1292.733 x 568.208
50.895 x 22.370
Die Line File:
NET-Networking
Pushpak Jain
Please refer to drawing
F7C063_WEMO MINI V2_ PACKAGING COST DOWN
Color Plates:
Notes:
Artwork File:
horizontal
00
RELEASE DATE:
11/26/2019
Tolerance:+/- 1/32" - 0.8mm
Blank Size (mm):
Finish:
DIELINE:
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
This dieline works for following skus (if any):
INNOVATION CREATIVE GROUP
131984
FILE
NAME
QSG_WSP080_8820-02983_RevA00_Mini_v2_Costdown
SKU#
WSP080
P#
8820-02983
REV
A00
DESIGNER
Jonathan
DATE
12/13/19 6:59 PM
VERSION
01