Owner`s manual

4. Turn the engine to the ON position (see figure 11).
ENGINE SWITCH
ON
Figure 11- Engine Switch
.
Operate the starter. Pull the starter handle lightly until you feel resistance, then pull
briskly.
Gently return the handle to the original position. If the engine does not start up, repeat
this step. If the engine still does not start after several sttenpts, please review the
troubleshooting section for assistance.
.
Figure 12- Pulling Recoil Starter Handle
If the choke lever has been moved to the CLOSED position to start the engine,
gradually move it to the OPEN position as the engine warms up.
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch to the OFF position
Under normal conditions, use the following procedure.
1. Move the throttle lever to the SLOW position.
2. Turn the engine switch to the OFF position.
3. Turn the fuel valve lever to the OFF position.
14