MODEL 2202, 2202T 20-GALLON AIR COMPRESSOR Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Air Compressor Safety Warnings...................................................................... 6 Electrical Information........
INTRODUCTION Thanks for purchasing the WEN Air Compressor. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
AIR COMPRESSOR SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. AIR COMPRESSOR SAFETY 1. Use your air compressor in accordance with these instructions, taking into account working conditions and the task at hand. Use of the compressor for operations other than its intended use could result in personal injury. 2.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
KNOW YOUR AIR COMPRESSOR TOOL PURPOSE Plug in nailers, staplers, spray guns, or any other pneumatic tool to your WEN Air Compressor for a versatile and dependable set-up that answers a variety of woodworking and painting needs. Refer to the following diagrams to become familiarized with all the parts and controls of your air compressor. The components will be referred to later in the manual for assembly and operation instructions.
ASSEMBLY & ADJUSTMENTS INSTALLING THE WHEELS Fig. 2 1. Insert the bolt (Fig. 2 - 1) into the wheel (Fig. 2 - 2) through the 13mm flat washer (Fig. 2 - 3), wheel bracket (Fig. 2 - 4), and 10mm flat washer (Fig. 2 - 5). Tighten with M10x1.25 hex nut (Fig. 2 - 6). Attached the hub cap (Fig. 2 - 7) on the outside of the wheel. Repeat for both wheels. 4 2 INSTALLING THE AIR FILTER 1 1. Remove the plastic plug. Install the air filter (Fig. 3 - 1) before starting the air compressor.
OPERATION STARTING THE COMPRESSOR 1. Follow all instructions in the assembly guidelines outlined above before attempting to start the compressor. Do not start the generator until the air filter, oil cap breather and oil have been properly installed. 2. Inspect the machine components to make sure that there are no damaged or worn parts. Replace any damaged parts immediately. Only repair using identical replacement parts. 3.
OPERATION SHUTTING DOWN THE COMPRESSOR 1. Turn the pressure switch to the OFF position. Then unplug the power cord. 1 Fig. 6 2. Reduce pressure in the tank through the outlet hose or by pulling the relief valve ring (Fig. 6 - 1). 3. Drain water from air tank by opening drain valve (counterclockwise) on bottom of the tank. WARNING! Wear safety goggles when opening drain valve. Escaping air and moisture may propel debris that may cause eye injury.
MAINTENANCE CHECKING / CHANGING OIL Check the oil level regularly from the oil gauge. The oil level must be between A and B (Fig. 7). Do not overfill or underfill. When the oil level is below B, refill with semi-synthetic or synthetic air compressor oil until the level reaches the center of the red circle in the oil gauge. Fig. 7 A B Oil should be changed after 200 hours of operation. Prepare a container to catch the oil and drain the oil from the oil gauge.
TROUBLESHOOTING GUIDE WARNING! Stop using the generator immediately if any of the following problems occur or risk serious personal injury. If you have any questions, please contact customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com. Problem Common Causes Solution Air leaks from the regulator. The regulator has become damaged Regulator does not regulate presReplace the regulator/internal parts. or dirty. sure any more. 1. Close the drain valve. 2.
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
EXPLODED VIEW & PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 Part No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
