MODEL 2289 10-GALLON AIR COMPRESSOR Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Air Compressor Safety Warnings...................................................................... 6 Electrical Information........
INTRODUCTION Thanks for purchasing the WEN Air Compressor. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
AIR COMPRESSOR SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. AIR COMPRESSOR SAFETY 1. Do not use your air compressor if the pressure switch does not turn the compressor on and off. An air compressor that cannot be controlled with the switch is dangerous and must be repaired. 8. Always operate the compressor in a well-ventilated area away from combustible materials, gasoline, or solvent vapors.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
KNOW YOUR AIR COMPRESSOR TOOL PURPOSE Plug in nailers, staplers, spray guns, or any other pneumatic tool to your WEN air compressor for a versatile and dependable set-up that answers a variety of woodworking and painting needs. Refer to the following diagrams to become familiarized with all the parts and controls of your air compressor. The components will be referred to later in the manual for assembly and operation instructions.
ASSEMBLY & ADJUSTMENTS INSTALLING THE WHEELS 1. Insert the bolt (Fig. 2 - 1) into the wheel (Fig. 2 - 2), through the wheel bracket (Fig. 2 - 3), through the flat washer (Fig. 2 - 4), and install the nut (Fig. 2 - 5). Tighten the nut. INSTALLING THE AIR FILTER 1. Remove the plastic plug as instructed on the yellow hang tag on the unit. Install the air filter (Fig. 3 - 1). Fig. 2 3 Fig. 3 1 2 4 5 1 OPERATION STARTING THE COMPRESSOR 1.
OPERATION NOTE: the compressor will not turn ON if the tank pressure is above the cut-in pressure. Once the tank pressure drops below the cut-in pressure, the compressor will automatically start up, and then automatically shut down once the cut-out pressure is reached. NOTE: make sure this switch is set to OFF before unplugging, plugging in, or storing the compressor. Fig. 6 3 1 2 WARNING! To prevent burns or other injuries, DO NOT touch the compressor while it is running.
MAINTENANCE WARNING! Always shut off and unplug the compressor and relieve all air pressure from the system before performing any cleaning or inspection on the air compressor. CLEAN AND INSPECT DAILY 1. Pull the pressure release valve ring to open the pressure release valve after each operation. The pressure release valve should automatically close when tank pressure reaches approximately 40 – 50 PSIG. If it does not automatically close, it needs to be replaced.
TROUBLESHOOTING GUIDE WARNING! Stop using the generator immediately if any of the following problems occur or risk serious personal injury. If you have any questions, please contact customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com. Problem Air leaks from the regulator. Regulator does not regulate pressure anymore. Possible Cause Regulator is damaged or dirty. Replace regulator. Call 1-800-232-1195 for assistance. Tank drain valve is open. Close drain valve.
EXPLODED VIEW & PARTS LIST 40 4 5 16 25 3 31 38 24 22 29 36 1 36 32 28 35 38 37 30 21 20 17 18 19 11 8 13 12 9 14 7 15A 39 6 23A 33 32 34 2 10 26 29 27 13
EXPLODED VIEW & PARTS LIST 14 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Model No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years from date of purchase or 500 hours of use; whichever comes first.
THANKS FOR REMEMBERING V. 2019.11.