Variable Speed Rotary Tool Model # 2307 bit.ly/WENvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
TABLE OF CONTENTS 2 3 5 6 7 8 9 11 12 14 Product Specifications General Safety Rules Rotary Tool Safety Electrical Information Know Your Rotary Tool Assembly Operation Maintenance Exploded View and Parts List Warranty Product Specifications Model Number: Motor: Motor Speed: Collet Size: Weight: 2 2307 120 V AC, 60 Hz, 1A, AC only 8000-30000 RPM Supplied with 3/32” & 1/8” Collets 1.
GENERAL SAFETY RULES You know the drill. The purpose of the following safety symbols is to attract your attention to possible dangers. We don’t want any of our beloved WEN customers accidentally injuring themselves. The safety symbols and the explanations with them deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. These instructions and warnings are not substitutes for proper accident prevention measures.
GENERAL SAFETY RULES 8. WEAR A FACE MASK OR DUST MASK to fight the dust produced during operation. WARNING: Dust generated from certain materials can be hazardous to your health. Always operate the tool in a well-ventilated area and provide for proper dust removal. Use dust collection systems whenever possible. 9. ALWAYS remove the power cord plug from the electrical outlet when making adjustments, changing parts, cleaning, or working on the tool. 10. KEEP GUARDS IN PLACE AND IN WORKING ORDER. 11.
ROTARY TOOL SAFETY 1. CHECK THE WORKPIECE for any cracks, bumps, nails or obstructions before commencing operation. 2. NEVER press in the locking pin when the rotary tool is running. 3. DO NOT cut any workpiece larger than the rotary tool’s capacity. Always maintain a firm grip on the rotary tool. 4. SECURE THE WORKPIECE whenever possible to prevent wobble, damage to the workpiece, and personal injury. 5. ALWAYS USE safety goggles, a dust mask and hearing protection when using the rotary tool. 6.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS: IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR ROTARY TOOL 3 4 2 1 5 3 100-PIECE ACCESSORY KIT COMPONENTS 1. Collet Nut 2. Collet Lock 3. Brush Cover (2) 4. Speed Dial 5. Power Switch 1. Bit Changing Spanner Wrench 2. Felt Polishing Wheels (2) 3. High Speed Cutters (2) 4. Grinding Stones (10) 5. Sanding Discs (54) 6. Dressing Stone 7. Dum Sander 8. Cut-off Wheels (20) 9. Sander Bands (4) 10. Mandrels (2) 11. Drill Bits (2) 12. Collets (2) 13. Hex wrench 1. 4. 7. 10. 2. 5. 8. 11. 3. 6. 9. 12. 13.
ASSEMBLY ATTACHING FLEX SHAFT: NOTE: Flex Shaft attachment is not included for this model. If you would like to purchase the attachment, please visit www.wenproducts.com. FOR VIDEO INSTRUCTIONS VISIT: http://bit.ly/wenflexshaft 1. Unscrew the black threaded collar at the end of the rotary tool. 2. Grab the flex shaft and slide the inner core out about 2-3”. 3. Loosen the collet nut by pressing down on the collet lock button and unscrewing the collet nut. 4.
OPERATION Read and thoroughly understand all instructions and safety information before operating this rotary tool. Failure to do so may cause serious injury or death. Do not allow anyone to operate this tool who has not read this manual. As with all power equipment, a rotary tool can be dangerous if assembled or used improperly. Do not operate this power tool if you have doubts or questions concerning safe operation. Call our customer service department at 1-800-232-1195 to address these concerns.
OPERATION OPERATING THE ON/OFF SWITCH: 1. The power switch is located on the underside of the handle. It has O (OFF) and I (ON) settings. To switch on the tool, flip it to I (the ON position). 2. To switch off the tool, simply flip the switch to O (the OFF position). Be certain the tool is in the OFF position when not in use and during all maintenance activities.
OPERATION ACCESSORY Felt Polishing Wheel High Speed Cutter Grinding Stone Sanding Disc Dressing Stone Drum Sander Cut-Off Wheel EXPLANATION Finishing processes for smoothing a workpiece’s surface. Fast, lightweight cuts for carving and engraving. Stone composed of an abrasive compound and used for various grinding (abrasive cutting) and abrasive machining operations. Abrasive grain adhered onto the surface of a cloth. A solid block of extremely hard abrasive.
EXPLODED VIEW AND PARTS LIST 12
EXPLODED VIEW AND PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No.
LIMITED ONE YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of one (1) year from date of purchase.