VARIABLE SPEED CORDLESS ROTARY TOOL Model # 2309 bit.ly/WENvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
TABLE OF CONTENTS 2 3 4 5 6 8 9 11 12 13 14 Product Specifications Safety Information General Safety Rules Rotary Tool Safety Electrical Information Know Your Rotary Tool Assembly and Adjustments Operation Maintenance Exploded View and Parts List Warranty PRODUCT SPECIFICATIONS Model Number: Rated Voltage: Battery Model Number: Battery Pack Capacity: Charger Model Number: Charger Specs: No Load Speed Range: Max Disc Diameter: Max Collet Capacity: Weight of Tool w/ Battery: 2 2309 9.
GENERAL SAFETY RULES You know the drill. The purpose of the following safety symbols is to attract your attention to possible dangers. We don’t want any of our beloved WEN customers accidentally injuring themselves. The safety symbols and the explanations with them deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. These instructions and warnings are not substitutes for proper accident prevention measures.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, knowing how your item works, and not doing dumb stuff on purpose. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug the battery of your tool until the following steps have been read and understood. 1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and possible hazards. 2. AVOID DANGEROUS CONDITIONS.
GENERAL SAFETY RULES 15. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled footwear. Keep the floor clear of oil, scrap, and other debris. 16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instructions for lubricating and changing accessories. 17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.
SAFETY RULES FOR BATTERIES 10. Do not operate the charger or the battery if it has received a sharp blow, either from being dropped or damaged. Take it to a qualified service technician before attempting to use. 11. Do not disassemble the charger or the battery pack. Take these to a qualified service technician when service or repairs are required. Incorrect assembly may result in electric shock or fire. 12.
SAFETY RULES FOR CHARGERS CHARGER Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp edges. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock. Keep the battery charger, battery pack(s) and the cordless tool out of the reach of children.
ELECTRICAL INFORMATION IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR ROTARY TOOL CORDLESS ROTARY TOOL 1 - Rotational speed control 2 - Battery-operated LED 3 - Battery pack release button 3a - Battery pack 4 - Metal stirrup hanger 4a - Wrist strap 5 - ON/OFF switch 6 - Clamping nut 7 - Spigot nut 8 - Spindle lock BATTERY CHARGER (A) 9 - Charging cradle 10 - Mains adapter 11 - LED ACCESSORIES (B) 12 - 6 HSS drills ( Ø0.8mm, Ø 1mm, Ø1.2mm, Ø1.4mm, Ø1.6mm, Ø2.
OPERATION CHARGING THE BATTERY PACK A battery pack that has been unused for a while or a pack that has never been charged before must be charged completely before using. The battery pack requires roughly 3 to 5 complete charging and draining cycles before it can reach its full potential. CAUTION: Always unplug the charger from the wall before inserting or removing the battery from the charger.
OPERATION BIT SELECTION FUNCTION Drilling ACCESSORY HSS Drill (#12) Milling Milling Bits (#21) Engraving Derusting Engraving bits (#20) Metal Brush (#16) Polishing Polishing Wheel (#14) Cleaning Plastic Brush (#19) Grinding Cutting Grinding Wheels (#15) or Grinding Bits (#22) Cutting Discs (#17) APPLICATION Drilling wood (Fig. C) Various tasks such as hollowing out, gouging, shaping, slotting or grooving Markings (Fig. D) Derusting (see Fig.
MAINTENANCE WARNING: Remove the plug from the socket before carrying out any adjustments, service or maintenance. 1. NEVER use water or other liquids to clean the electrical portions of the tool. 2. ALWAYS clean the tool and bits after use. 3. ENSURE that the ventilation slots are not blocked to prevent overheating. 4. REMOVE AND DISPOSE of damaged attachments. 5. CHECK that the locking jaw is correctly aligned before use. EXPLODED VIEW AND PARTS LIST No.
EXPLODED VIEW AND PARTS LIST 13
LIMITED ONE YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of one (1) year from date of purchase.