MODEL 23101 ROTARY TOOL & ACCESSORIES KIT Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Rotary Tool Safety Warnings............................................................................. 6 Electrical Information....
INTRODUCTION Thanks for purchasing the WEN Rotary Tool Kit. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
ROTARY TOOL SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. ROTARY TOOL SAFETY 1. Work Environment. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk of electrical shock. Do not operate the tool in the presence of flammable liquids or gases. 2. Tool Inspection.
ELECTRICAL INFORMATION DOUBLE-INSULATED CHARGER The tool’s electrical system is double-insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double-insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal components with protecting insulation.
KNOW YOUR ROTARY TOOL UNPACKING Carefully remove the rotary tool from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
KNOW YOUR ROTARY TOOL Refer to the chart below for explanations and recommended applications for your rotary tool accessory bits. Accessory Explanation & Applications 1. Collet For holding a rotary bit in place. Your tool comes with 1/8-inch and 3/32-inch collets. Use the correct size collet that matches the shank diameter of your rotary bit. 2. Wrench The front of the wrench is for loosening the collet nut to change collets.
ASSEMBLY & ADJUSTMENTS WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and unplugged from the power supply before making adjustments or changing accessories. INSTALLING ROTARY TOOL BITS Fig. 1 1. Switch off and unplug the tool before attempting any adjustments. 2. Hold down the spindle lock button (Fig. 1 - 1) and rotate the collet nut (Fig. 1 - 2) until the lock engages. 1 3. Using the included wrench, loosen the collet nut (Fig.
OPERATION WARNING! Read and thoroughly understand all instructions and safety information before operating this rotary tool. Failure to do so may cause serious injury. ADJUSTING THE SPEED OF THE ROTARY TOOL The variable speed adjustment dial (Fig. 5 - 1) on the top of the rotary tool is used to set the desired rotation speed. The speed for your rotary tool ranges from 10,000 to 32,000 RPM. To increase the speed, turn the wheel forward to a higher number.
MAINTENANCE WARNING! Disconnect the rotary tool from the power supply before carrying out any adjustments, service or maintenance. IMPORTANT! Servicing of the tool requires extreme care and knowledge and should be performed only by a qualified service technician. CLEANING AND INSPECTION 1. Always clean the tool and accessories after each use. Use a clean cloth and a soft brush to clean your tool. Fig. 6 1 2. Never use water or other liquids to clean the electrical portions of the tool. 3.
EXPLODED VIEW & PARTS LIST 7 6 10 9 5 4 8 3 11 2 12 1 13 14 15 16 17 18 No. 1 2 3 4 5 6 7 8 9 10 11 Part No. 23101-001 23101-002 23101-003 23101-004 23101-005 23101-006 23101-007 23101-008 23101-009 23101-010 23101-011 Description Power Cord Trimming Circuit Board Bearing Right Body Screw 2.9x15 Carbon Brush Spindle Lock Button Collet Collet Nut Nose Cap Bearing Qty. 1 1 1 1 6 2 1 1 1 1 1 19 No. 12 13 14 Part No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
NOTES 15
THANKS FOR REMEMBERING V. 2022.06.
