000-POUND CAPACITY SCAFFOLDING Model # 31110 For replacement parts visit WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS Product Specifications Safety Introduction Important Safety Rules Exploded View & Parts List Assembly & Adjustments Operation Maintenance Warranty Statement 2 3 4 6 7 10 11 12 TECHNICAL DATA Model Number: 31110 Maximum Capacity: 1000 lbs Evenly Distributed For Single Stage 750 lbs Evenly Distributed for Two Stages (Combined) Single Stage Height: 28 to 71.3 in. Maximum Stackable Levels: Up to 2 Levels Adjustable Mounting Holes: 1/2 inch diameter, 30 per side Work Platform Dimensions: 67.
SAFETY INTRODUCTION Thanks for purchasing the WEN Scaffolding. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions. Safe operation of this tool requires that you read and understand this operator’s manual and all labels affixed to the tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
SPECIFIC RULES FOR SCAFFOLDING Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, read and understand this entire instruction manual. Learn the tool’s applications, limitations, and possible hazards. WORK AREA SAFETY 1. Keep your work area clean, uncluttered, and well lit. Cluttered areas invite injuries and accidents. Keep the ground clear of tripping hazards.
SPECIFIC RULES FOR SCAFFOLDING 5. Acids and other corrosive substances may severely affect the integrity of the scaffolding. Use extreme care around such materials and follow applicable instructions. Do not use acids or other corrosive substances on scaffolding parts, as they could corrode the metal and decrease its strength. 6. Immediately remove scaffolding from use and discard if exposed to excessive heat (such as fire), which could cause a loss of structural integrity. 7.
EXPLODED VIEW & PARTS LIST Carefully remove the tool and all contents from the packaging. Check all components and compare against the diagram and parts list below. If any part is damaged or missing, please contact our customer service at (800) 2321195, M-F 8-5 CST or email us at techsupport@wenproducts.com. 7 No. 1 2 3 4 5 6 7 6 Part No.
ASSEMBLY WARNING: Read the instructions before beginning to assemble the scaffolding. Scaffold components 6 and replacement parts from other7manufacturers must not be used with this particular model. Parts should fit together without being forced, otherwise the structural integrity may be compromised. Assembly and adjustments of the scaffolding requires two people. Get a good friend (or a trustworthy foe) to help you. MOUNTING THE CASTERS (Fig. 1) 1.
ASSEMBLY MOUNTING THE PLATFORM (Fig. 4 & 5) 1. Lay the plywood platform (3) over the flange pins that extend up from the side rails and into the oblong holes cut in the wood platform. These flange pins must fit properly. 2. Secure the wood platform (3) in place with the platform hold-downs (6). 3. Rotate the platform clips into the engaged position, as indicated in Fig. 4. 7 4. If needed, a second scaffold (sold separately) must be assembled by using the first scaffold as a stable platform.
ASSEMBLY ATTACHING A SECOND SCAFFOLD (Fig. 6 & 7) WARNING: Before assembling the second stage, the lower stage must be fully assembled even if it is not being used. The lower stage provides needed structural support for the upper stage. The caster wheels must be LOCKED to ensure that the lower stage will not move. Observe all safety rules for boarding, working on, and getting off the first stage when assembling. Assemble the upper stage one piece at a time to help prevent clutter and falling parts.
OPERATION WARNING: To prevent serious injury, make sure all the warnings and instructions have been read and understood before operating this tool. If you have any questions or concerns, please contact our customer service at (800) 232-1195, M-F 8-5 CST. WARNING: DO NOT OVERLOAD SCAFFOLD! IT MAY RESULT IN SERIOUS INJURY! Rated working load (evenly distributed): 1000 pounds for one stage and 750 pounds combined for two stages.
MAINTENANCE Procedures not specifically explained in this manual must be performed only by a qualified technician. Only a qualified technician. Only a qualified technician may replace any parts or make any safety equipment additions to this scaffold. 1. Before each use, inspect the general condition of the scaffold.
LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
