Use and Care Manual

These safety instructions can’t possibly warn of every scenario that may arise with this tool,

always make sure to stay alert and use common sense during operation.

13. Never perform layout, assembly or set-up

work on the table while the lathe is operating.

14. After turning off the lathe, wait until the cen

ters, tailstock, and headstock come to a complete

stop before touching the workpiece.

15. Always turn off and unplug the machine

before cleaning, making adjustments or chang

ing attachments. Accidental start-ups may oc-

cur if the tool is plugged in during an accessory

change or adjustment.

WOOD LATHE SAFETY WARNINGS

WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules.

Failure to follow the safety instructions may result in serious personal injury.

16. CLEANING. Never use solvents to clean plas-

tic parts. Solvents could dissolve or otherwise

damage the material. Use only a soft damp cloth

to clean plastic parts.

17. REPLACEMENTS. Should any component of

your sander be missing/damaged or fail in any

way, shut off the switch and remove the plug

from power supply outlet. Replace the missing,

damaged, or failed parts using only identical

replacement parts before resuming operation.