Product Manual

Your dust collector is now ready to be placed into service. Before

connecting to a power source, be sure the power source is properly

grounded and is of proper voltage and amperage (See page 5, Elec-

trical Information).

ASSEMBLY

9. INSTALLING THE FILTER BAG

Hang the filter bag (white) onto the hook of the upper bag support

pole. Attach the bag over the top opening of the collector. Secure

it with a bag clamp (O).

10. INSTALLING THE COLLECTION BAG

Attach the plastic collection bag over the bottom opening of the

collector around the rubber strip. Bag clips are located around the

collector to assist in holding up the collection bag. The clips are

placed slightly above the legs so that the bag can be held at the suit-

able height. Simply lift the metal plate of the clips and tuck in the

bag. Then, use the second bag clamp (O) to secure the bag all the

way around the collector.

11. INSTALLING THE HANDLE

Install the handle (N) onto the back of the collector using M8x20

hex screws as shown.

NOTE: When transporting the dust collector, only pull on the

handle. DO NOT use the support poles for transportation pur-

poses as they are not designed for pulling and might come loose.

Fig. 9