VARIABLE SPEED ELECTRIC SHEAR For replacement parts visit Model # 3650 bit.ly/wenvideo WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS 2 3 5 6 6 8 9 10 Technical Data General Safety Rules Electrical Information Know Your Shear Operation Maintenance Exploded View and Parts List Warranty TECHNICAL DATA Model Number: Motor: Speed: Minimum Cutting Radius: Maximum Cutting Capacity: Head Swivel: Product Weight: Product Dimensions: 2 3650 120 V, 60 Hz, 4A 0 to 2500 strokes per minute 7-7/8 inches 18 gauge for Sheet Metal 20 gauge for Stainless Steel 360° 4.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and possible hazards. 2. AVOID DANGEROUS CONDITIONS. Do not use power tools in wet or damp areas or expose them to rain.
GENERAL SAFETY RULES 15. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled footwear. Keep the floor clear of oil, scrap, and other debris. 16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instructions for lubricating and changing accessories. 17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR SHEAR 360° Swivel Head Blade Blade Cover Swivel Locking Hex Screws Trigger Switch Lock Button OPERATION WARNING: To avoid injury from accidental startups, turn switch OFF and remove the plug from the power source outlet before making any adjustments. NOTE: Maintain tools with care. This tool requires no additional lubrication. Never use water or chemical cleaner to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place away from the reach of children.
OPERATION HOW TO SHEAR Before cutting your workpiece, make some practice cuts on a piece of scrap material to make sure that you can adequately operate the tool. Place the shearing jaws at the edge of the workpiece with the piece of metal running between the blades. Squeeze the variable speed trigger switch to your preferred speed. Gradually move the blade through the material following your desired pattern. Never force the tool to do a job that it cannot handle.
MAINTENANCE SERVICE: Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components, possibly causing a serious hazard. We recommend that all tool service be performed by a WEN Service Center or Authorized WEN Service Station. TOOL LUBRICATION: Your tool has been properly lubricated and is ready to use. No additional lubrication is required. CARBON BRUSHES: The brushes in your tool have been engineered for many hours of dependable service.
EXPLODED VIEW AND PARTS LIST 14 8 1 9 22 35 10 18 11 4 1213 23 25 19 26 15 2 5 6 28 24 16 17 3 20 21 7 No.
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.