Use and Care Manual

AMPERAGE

REQUIRED GAUGE FOR EXTENSION CORDS

25 ft. 50 ft. 100 ft. 150 ft.

2.8 A 18 gauge 16 gauge 16 gauge 14 gauge

WARNING: For your own safety, read the instruction manual before operating the band saw.

1. Wear eye protection.

2. Do not wear gloves, a necktie, jewelry, or loose clothing.

3. Make sure the saw is on a firm, level surface and properly secured.

4. Use only the recommended accessories.

5. Use extra caution with very large, very small, or awkward workpieces.

6. Keep hands away from blade at all times to prevent accidental injury.

ASSEMBLY

UNPACKING

Carefully unpack the band saw and all its parts, and compare against the list below. Do not discard the carton or

any packaging until the band saw is completely assembled.

WARNING: If any part is missing or damaged, do not plug in the band saw until the missing or dam-

aged part is replaced.

1. Band Saw (1)

2. Fence (1)

3. Table Assembly (1)

4. Open Spanner (1)

5. 6mm Hex Wrench (1)

6. 4mm Hex Wrench (1)

7. Miter Gauge (1)

8. Feet (4)