Replacement Part List

14
EXPLODED VIEW AND PARTS LIST
BATTERY
1. Make sure the battery is fully charged before storage in order to maximize the life of the battery.
2. Do not store the battery pack on the tool.
3. After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
CHARGER
1. Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto
the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not place the charger
in wet conditions.
2. Unplug the charger when there is no battery in it.
3. Fully charge the battery before placing it in storage.
4. Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger in
direct sunlight or in damp conditions. Do not charge outside. Recharge at room temperature. If the battery is hot,
allow it to cool down before recharging.
No. Part Number Description Qty
1 40401 40V Battery 1
2 40413-002 Screw 22
3 40413-003 Right Battery Housing 1
4 40413-004 PCB 1
5 40413-005 Trigger 1
6 40413-006 Base Plate 2
7 40413-007 Spring 1
8 40413-008 Left Battery Housing 1
9 40413-009 Battery Latch 1
10 40413-010 Pin 1
11 40413-011 Torsional Spring 1
12 40413-012 Shaft 1
13 40413-013 Spring 1
14 40413-014 Safety 1
15 40413-015 Cable Clamp 1
16 40413-016 Tube Assembly 1
17 40413-017 Wiring Harness 1
18 40413-018 Wire Casing 4
19 40413-019 Right Housing 1
20 40413-020 Left Housing 1
21 40413-021 The wire frame 1
22 40413-022 Motor Assembly 1
23 40413-023 Flange 1
No. Part Number Description Qty
24 40413-024 Screw 2
25 40413-025 Spindle 1
26 Handle Assembly 1
26.1 Knob 1
26.2 Handle 1
26.3 Screw 1
27 Debris Shield Assembly 1
27-1 Shield 1
27-2 Blade 1
27-3 Screw 2
27-4 Blade Guide 1
28 40413-028 Screw 1
29 Cutter Head Assembly 1
29.1 Rivet 2
29.2 Head Housing 1
29.3 Seat 1
29.4 Spring 1
29.5 Skate 1
29.6 Cutting Wire 1
29.7 Spool 1
29.8 Cap 1
30 40400 Charger 1
40413-026
40413-027
40413-029
MAINTENANCE